The eMWL as a modular system
The eMWL was developed as a modular design with three individual parts: the focusing unit, the relay module and the lens. Nauticam has developed components optimized to work with different camera manufacturers and their macro lenses, as well as a selection for three unique perspectives. Let's take a look at each part and dive a little deeper into the eMWL.

The complete eMWL system
Objective lenses, 60°, 100°, 130° - Relay unit - Focusing unit
eMWL-Focusing unit
Three focusing units have been developed to ensure the best results on a range of cameras, and each unit is optically matched to the recommended prime lenses. The eMWL is very sharp and has very good contrast, and the autofocus works very well. This is a significant advantage over other relay lenses available. You also have the option to add a manual focus gear. You can also use lens adapters like the Nikon FTZ, EF to EOS R or the Sigma MC-21. The focusing unit is the part closest to your port, it is designed with 6 glass elements in 3 groups and is connected via the bayonet lock system.

Focusing unit (NA87203) for Sony
Compatible lens:
- Sony SEL90M28G FE 90mm F2,8 Makro G OSS
eMWL-Relay unit
The next element to be attached to the front of the focusing unit is the relay lens. It was designed to the highest standard with 14 glass elements in 10 groups. The eMWL objective lenses create an inverted image so that it appears upside down. The relay lens corrects the inverted image and returns the image to the focusing unit and sensor. It is 150 mm long and only 62 mm wide at its widest point. This allows the front of the eMWL to be placed extremely close to your subject while keeping the bulk of the camera system and the photographer at a greater distance.
It also opens up creative possibilities for videographers to capture motion shots in tight spaces. Imagine poking through sea grass to expose a young batfish, or pulling back from a small subject to show the nook where it lives. All three focusing units use the same relay lens. It is possible to use the eMWL without the relay lens if you do not need the extended working distance. But then a camera or monitor that can correct the inverted image in the electronic viewfinder or screen is advantageous.

eMWL-Objective Lenses
The final piece that attaches to the front of the Relay Lens is the Objective Lens. There are three different versions with varying degrees of angle-of-view. You would choose one based on the look, subject or type of image you would like to produce. These, like the other two parts, can all be put together and disassembled underwater. You could keep all three objective lenses with you and swap out when needed.
You can shoot these just like you would any other lens, but the real magic happens when you get up close to your subject. The 130° and 100° objective lenses will focus as close as the front element and the 60° objective lens can focus as close as 15mm. You could fill up most of the frame with a nudibranch and still have room for a diver in the background! The EMWL is a great tool to boost your creativity.
130° Objektive Lens (NA87223)
This is the widest of the three Objective Lenses, designed with 9 elements in 7 groups. It is perfect for larger macro subjects or any image where you want to see more of the background. The image quality rivals the best wide angle lenses so feel free to shoot it for traditional wide angle shots as well.

100°-Objective Lens (NA87222)
This is an extremely versatile angle of view. It is the smallest and sleekest in physical size making it a good choice for timid subjects and tight spaces. It is designed with 9 elements in 6 groups. An angle of view of 100° is still a lot of background space for small macro subjects or to shoot wide angle with. A 16mm lens on FF is 107° for comparison.

60°-Objective Lens (NA87221)
For a narrower angle-of-view or if you would like the background elements to look more compressed, than the 60° objective lens is the perfect choice. It is designed with 9 elements in 6 groups. There are three focusing ranges that can be set on the lens, 8-55mm, 55-25mm and 25-15mm. I would suggest setting it to the 8-55mm setting and adjust to one of the closer settings when working extremely close to a subject. The closer setting work similar to an extension tube by moving the lens further away from the sensor.

Bayonet mount
The EMWL uses the Nauticam Bayonet Mounting System. You can easily attach or remove the EMWL to shoot with just the macro lens or add other accessories. You will need to add the appropriate Bayonet Mount Converter to the front of your port. If you wish to use a Super Macro (SMC-1 or SMC-2) or Compact Macro Converter (CMC-1 or CMC-2), they can be attached with an optional Bayonet Mount Adapter.
- M67 Bayonet Mount Converter II for Nauticam 67mm threaded ports (NA83250)
- M77 Bayonet Mount Converter II for Nauticam 77mm threaded ports (NA83251)
- Bayonet Mount Adapter for SMC and CMCC (NA83214)