Important controls can be operated whilst holding the grips. Frequently-used buttons such as ISO, AF Point Selection and Multi-function Selection buttons are operated by external levers, allowing quick and accurate operation.
- AF Start button is locked by pressing and turning the Control.
- AF Start Lever will remain pressed by pushing the lever forward.
The main command dial, the quick control dial and others have a damper (spring) to provide secure operation. (Controls on the camera will not slip because of the damper).
The tension on the Shutter Release lever can be adjusted in 3 steps
The tension on the Shutter Release lever can be adjusted in 3 steps, by changing the location of the spring inside the housing. The distance to half-depress the shutter release can be adjusted in 2 steps, by changing the location of the plastic piece behind the shutter lever, inside the housing.
Leak Alarm Unit as standard Equipment
The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment.
It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included.
Compatible with Optical YS Converter/C
Equipped with two fiber-optic cable sockets for optional Optical YS Converter/C.
*Serial numbers YSC200094 and above are compatible. Serial numbers below YSC200094 are not compatible. New firmware will be required.
Other Features
- The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
- The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
- The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing.
- Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
- All controls have luminescence stickers which glow in dark environment.
- Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.8x can be used.
- Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only).
- Accessory port enables use of Leak Sentinel (vacuum sensor).
- Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
- Built-in leak sensor immediately alerts you to water ingress.
- Tripod screw mount is located on the centre underside of the housing.
- Sea&Sea MDX-5D MARK IV Underwater Housing
- Spare O-ring set: 62148
Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.
- Construction: Corrosion-resistant aluminium alloy (machined, anodised)
- Handle: Corrosion-resistant die-cast aluminium alloy
.
- Depth rating: 100m/330ft
- Dimensions (WxHxD): 341 x 198 x 141mm
- Weight (approx.): 3,000g/106oz (housing only)
Note: The MDX-5D Mark lll and the MDX-5D Mark lll ver. 2 Gehäuse can be converted to accommodate both the EOS 5D Mark lV and the EOS 5D Mark lll (subject to charge)
.
There are no reviews yet.
SHOPVOTE - Bewertungen
There are no product reviews available yet
