Easy operation.
Important controls such as ISO, AF-ON and Start-Stop can be activated and deactivated more easily with a new lever design.
The multi-controller is located on the right side of the rear gear.
Compatible with the VF180 1.2x and VF45 1.2x viewfinders
Mounting the VF180 or VF45 prism viewfinder on the housing increases magnification by 1.2x and the entire field of view is visible at the same time. Recommended for users who are committed to strict image composition and focus.
Luminescent decals
Important controls, including levers and buttons, glow in the dark.
Diopter adjustment dial
The camera's diopter adjustment knob can be operated from the walker. This feature is useful when two or more people (with different eyesight) are using the walker.
The main dials are equipped with a damper (spring)
The main dial, the speed dial, the diopter adjustment dial and the Live View film lever have a spring-loaded damper for safe operation. (The camera controls do not slip through the dampers).
Equipped with a movable focus/zoom wheel
When the focus/zoom wheel is pulled out, the gear inside the housing moves outwards so that large-diameter lenses can be mounted easily.
Other functions
The housing has three accessory ports. One is designed for the N-flash connector and the other two for the HDMI output and the leakage monitor (vacuum system).
Equipped with two fibre optic cable jacks.
The port interlock can be activated from the outside of the enclosure.
Equipped with two sacrificial zinc diodes to prevent electrolysis damage.
3-stage shutter sensitivity adjustment.
Additional information
* The housing is not equipped with a flash connector when shipped from the factory. Use (a) fibre optic cable(s) when connecting external flashes. An optional 2-pin sync cable connector (SEA50122) is required if you wish to use a conventional hard-wired sync cable.
>
Underwater housing Sea & Sea MDX-80D for Canon 80D
O-ring grease
O-ring remover
Inbus key (6mm / for handle disassembly)
Inbus key (3mm / for connecting screw)
O-ring care instructions
Operating instructions
Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing often does not include a port or an external viewfinder. These can be purchased as accessory items. If you have any questions about the configuration of your system, do not hesitate to contact us.
Housing material: corrosion-resistant aluminium alloy
Handle material: corrosion-resistant die-cast aluminium alloy .
Nominal depth: 100m
Dimensions (WxHxD): 340 x 194 x 140 mm
Weight: Approx. 3,000g (housing only)
There are no questions about the product so far. Ask the first question.
